Support Center

Firmware Updates

Last Updated: Dec 20, 2013 09:48AM PST

Firmware updates are available for the following camera models: 


Scuba Series Models 322 & 323 - Resolves reddish tint in video and pictures  - Click here to download the firmware update.


Summit Series Model 335 - This firmware will fix small charging issues (turns off when done and full charge green LED light indicator) as well as increase the bitrate from 4Mbps to 8Mbps for smoother video. High action will be less blurry. But, your file sizes will be larger. - Click here to download the firmware update. 


Summit Series Model 337 - This firmware will fix small charging issues (turns off when done and full charge green LED light indicator) as well as increase the bitrate from 4Mbps to 8Mbps for smoother video. High action will be less blurry. But, your file sizes will be larger. - Click here to download the firmware update. 


Impact Series Model 365 - This firmware will fix small charging issues (turns off when done and full charge green LED light indicator) as well as increase the bitrate from 4Mbps to 8Mbps for smoother video. High action will be less blurry. But, your file sizes will be larger. - Click here to download the firmware update. 


Impact Series Model 367 - This firmware will fix small charging issues (turns off when done and full charge green LED light indicator) as well as increase the bitrate from 4Mbps to 8Mbps for smoother video. High action will be less blurry. But, your file sizes will be larger. - Click here to download the firmware update. 


Ego Series Model 727 - Please check your firmware version before proceeding with an update. 

To check your firmware version, connect via wifi to a smartphone or tablet. Then, download the Action Connect App, go to Settings, and then click About. The firmware version will be listed there.

If you are running version V2.2.1.0, please contact Technical Support for the correct firmware update. 

If your camera has any other version of firmware, please download the following firmware and install with the video instructions below, or watch the instructions on YouTube

This firmware will allow smoother video playback in our new Liquid Image app as well as fix a limitation of continuous shot mode where now your camera is able to take over 999 pictures. Once over the 999 limit, a new folder will be created and all other files will go into that folder. Click here to download the firmware. 



________________________________________________________________________________________________


Please follow the directions in the video below to update your camera's firmware. If you install the wrong firmware into your camera you may render the device inoperable and your warranty will be void. If you need additional assistance, please contact Technical Support.

Contact Us

https://d218iqt4mo6adh.cloudfront.net/
false
liquidimage
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete